Highly Luminescent Red Phosphorescent OLED with Interfacial Layers for Hole Transport and Electron Injection

Four kinds of red phosphorescent organic light-emitting devices were fabricated and compared to investigate the effect of interfacial layers for hole transport and electron injection. 1 nm-thick LiF in the device A and C and 1 nm-thick Cs₂CO₃ in the device B and D were deposited as an electron injection layer between the anode and the electron transport layer, and 5 nm-thick layer of dipyrazion[2,3-f:2′,2′-h]quinoxaline-2,3,6,7,10,11-hexacarbonitrile[HATCN] was inserted as a hole transport interfacial layer between the hole injection layer and the hole transport layer only in the device C and D. Under a luminance of 1000 cd/m², the power efficiencies were 7.6 lm/W and 8.5 lm/W in the device A and B, and 8.6 lm/W and 13.4 lm/W in the device C and D. The quantum efficiency of the device D was 15.8% under 1000 cd/m² which was somewhat lower than those of the device A and C, but a little higher than that of the device B. The luminance of the device D was much higher than those of the other devices at a given votage. The luminance of the device D at 7 V was 23,710 cd/m², which was 13.0, 3.4, and 4.0 times higher than those of the device A, B, and C at the same voltage, respectively.     

Study of blood collection and sample preparation for analysis of vitamin D and its metabolites by liquid chromatography–tandem mass spectrometry

The analysis of vitamin D status, with special emphasis on 25-hydroxyvitamin D and 1,25-dihydroxyvitamin D, is gaining interest in clinical studies due to the classical and non-classical effects attributed to this prohormone. In this research, the influence of the two steps preceding determination (viz. sample collection and preparation) on the quantitative analysis of vitamin D and its more important metabolites has been studied. Two preparation approaches, deproteination and solid-phase extraction (SPE), have been evaluated in terms of sensitivity to delimit their application, thus establishing that detection of 1,25-dihydroxyvitamin D cannot be addressed by protein precipitation. Concerning sample collection, serum and plasma reported high accuracy (above 83.3%) for vitamin D and metabolites, while precision, expressed as relative standard deviation, was below 12.9% for all analytes in both samples. Statistical analysis revealed that serum and plasma provided similar physiological levels for vitamin D₃, 24,25-dihydroxyvitamin D₃ and 25-hydroxyvitamin D₃, while significantly different levels were obtained for 1,25-dihydroxyvitamin D₃, always higher in plasma than in serum. Sample collection and treatment have proved to be significant in the analysis of vitamin D and its relevant metabolites.     

Tf2NH-catalyzed,highly regio-and stereo-selective synthesis of trisubstituted alkenes and indane derivatives from benzylic alcohols and alkenes

A reaction of benzylic alcohols with alkenes has been developed in the presence of bis(trifluoromethane)sulfonimide for the synthesis of trisubstituted alkenes and indane derivatives with high stereoselectivity.In general,benzylic alcohols react with 1,1-diaryl alkenes to afford trisubstituted alkenes,and the reaction with 1,2-disubstituted and trisubstituted alkenes affords indane derivatives through a [3 + 2] annulation reaction.     

Sensitive method for the determination of paricalcitol by liquid chromatography and mass spectrometry and its application to a clinical pharmacokinetic study

A highly sensitive, specific and rapid LC‐ESI‐MS/MS method has been developed and validated for the quantification of paricalcitol (PAR) in human plasma (500 μL) using paricalcitol‐d₆ (PAR‐d₆) as an internal standard (IS) as per regulatory guidelines. A liquid–liquid extraction method was used to extract the analyte and IS from human plasma. Chromatography was achieved on Zorbax SB C₁₈ column using an isocratic mobile phase in a gradient flow. The total chromatographic run time was 6.0 min and the elution of PAR and PAR‐d₆ occurred at ~2.6 min. A linear response function was established for the range of concentrations 10–500 pg/mL in human plasma. The intra‐ and inter‐day accuracy and precision values for PAR met the acceptance criteria. The validated assay was applied to quantitate PAR concentrations in human plasma following oral administration of 4 µg capsules to humans. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis,characterization and α‐amylase and α‐glucosidase inhibition studies of novel vanadyl chalcone complexes

A series of chalcone ligands and their corresponding vanadyl complexes of composition [VO (L^I–IV)₂(H₂O)₂]SO₄ (where L^I = 1,3‐Diphenylprop‐2‐en‐1‐one, L^II = 3‐(2‐Hydroxy‐phenyl)‐1‐phenyl‐propenone, L^III = 3‐(3‐Nitro‐phenyl)‐1‐phenyl‐propenone, L^IV = 3‐(4‐Methoxy‐phenyl)‐1‐phenyl‐propenone) have been synthesized and characterized using various spectroscopic (Fourier‐transform infrared, electrospray ionization mass, nuclear magnetic resonance, electron paramagnetic resonance, thermogravimetric analysis, vibrating sample magnetometer) and physico‐analytic techniques. Antidiabetic activities of synthesized complexes along with chalcones were evaluated by performing in vitro and in silico α‐amylase and α‐glucosidase inhibition studies. The obtained results displayed moderate to significant inhibition activity against both the enzymes by vanadyl chalcone complexes. The most potent complexes were further investigated for the enzyme kinetic studies and displayed the mixed inhibition for both the enzymes. Further, antioxidant activity of vanadyl chalcone complexes was evaluated for their efficiency to release oxidative stress using 2,2‐diphenyl‐1‐picryl‐hydrazyl‐hydrate assay, and two complexes (Complexes 2 and 4 ) have demonstrated remarkable antioxidant activity. All the complexes were found to possess promising antidiabetic and antioxidant potential.     

基于石墨烯独特生物界面效应的功能化载体研究进展

二维石墨烯及其衍生物与生物界面的相互作用, 展现出相比于传统维度粒子截然不同的特性, 为功能化医药载体的设计开发提供了潜力策略. 除了优异的电学、热学、光学等性能外, 石墨烯的独特的二维性质, 可以引起细胞更强的应激反应, 包括与细胞膜发生水平摩擦/竖直嵌入/三明治超级结构、选择性被细胞内吞、胞内限域折叠、引发细胞自噬以及隐形活化效应. 基于上述独特界面效应以及理论模拟机制, 对石墨烯进行合理设计, 可在保障安全性的前提下, 满足药物递送、疫苗佐剂、成像传感、光热治疗等需求. 本综述结合课题组近10年在(氧化)石墨烯与生物界面效应、微观作用机理及应用开发方面的系统研究工作, 同时涵盖了国际最新进展, 以期为石墨烯高效、安全体系的设计、构建和应用, 提供理论依据和前瞻性预测.     

Rhodium‐Catalyzed Stitching Polymerization of 1,5‐Hexadiynes and Related Oligoalkynes

A new mode of polymerization, rhodium‐catalyzed stitching polymerization, has been developed for the synthesis of π‐conjugated polymers with bridged repeating units from nonconjugated 1,5‐hexadiynes containing both terminal and internal alkyne moieties as monomers. The polymerization proceeded smoothly with a high degree of stitching efficiency under mild conditions, and 1,5,9‐decatriyne and 1,5,9,13‐tetradecatetrayne monomers could also be employed. The present polymerization strategy would be particularly beneficial for the synthesis of polymers consisting of a repeating unit that is difficult to prepare as a stable monomer because it does not require the use of a preformed bridged π‐conjugated monomer.     

Palladium‐catalyzed decarboxylative coupling of α,β‐unsaturated carboxylic acids with aryl tosylates

We report a general method for selective cross‐coupling of α,β‐unsaturated carboxylic acids with aryl tosylates enabled by versatile Pd(II) complexes. This method features the general cross‐coupling of ubiquitous α,β‐unsaturated carboxylic acids by decarboxylation. The transformation is characterized by its operational simplicity, the use of inexpensive, air‐stable Pd(II) catalysts, scalability and wide substrate scope. The reaction proceeds with high trans selectivity to furnish valuable (E)‐1,2‐diarylethenes.     

Uniform stability of semilinear wave equations with arbitrary local memory effects versus frictional dampings

This paper is concerned with the mixed initial–boundary value problem for semilinear wave equations with complementary frictional dampings and memory effects. We successfully establish uniform exponential and polynomial decay rates for the solutions to this initial–boundary value problem under much weak conditions concerning memory effects. More specifically, we obtain the exponential and polynomial decay rates after removing the fundamental condition that the memory-effect region includes a part of the system boundary, while the condition is a necessity in the previous literature; moreover, for the polynomial decay rates we only assume minimal conditions on the memory kernel function g, without the usual assumption of $g^{\prime }$ controlled by g.